Dantherm Air Handling Military Mobile Heating and Air Conditioning Equipment

dantherm

Since 1958, Dantherm Air Handling has developed and manufactured air-handling equipment which provides healthy and comfortable environments. In association with NATO member countries, Dantherm Air Handling has developed mobile heating, air conditioning and power-generation equipment for extreme-condition military applications. Its adoption as a NATO-standard company is proof that the most severe demands have been met. Dantherm units for heating and cooling of tent camps and field hospitals are ideal anywhere there is a need for temporary heating or air conditioning.

Dantherm Air Handling not only designs, develops and manufactures portable heating and cooling solutions, but – based on almost 50 years’ experience from warm air heaters, dehumidifiers and air-handling units – has also developed a strong competence within electronics cooling. The cooling knowledge is primarily used for solutions to the telecom sector (including TETRA).

ACM5 air conditioner

A small compact air conditioner (cooling output 5kW) for military shelters, the ACM5 is mounted with a trapdoor system in an opening in the shelter. During transportation, or when not in use, the unit is pushed into the shelter and the trapdoor locked. Its NSN is 4120-22-602-6562.

ACM7 air conditioner

The ACM7 MK II (cooling output 7kW) mobile air conditioning unit was developed primarily to provide air conditioning in transportable buildings or tents. It not only provides greater comfort but also protects equipment and materials from damage. The air conditioner is fitted with flexible air hoses and the unit itself must be located outside. It is controlled by a remote thermostat and its NSN is 4120-22-608-4874.

ACM18 mobile air conditioner

The ACM18 (cooling output 18kW) is designed for air conditioning in temporary or transportable buildings and tents. It is a compact, lightweight unit made of aluminium and built into a rigid steel frame.

The unit is designed to be placed outside, with supply air and return air ducted to one tent. For field hospitals where COLPRO is not required, but a higher filtration than for normal accommodation is wanted, a dual-filtration system for the internal air path is available. The ACM18’s NSN is 4120-22-615-5382.

A wheel kit is available as a basic add-on solution, which can be fitted to the ACM 18 on site without using any tools. Easily accessible handles lift the unit to transport mode, and the ACM 18 can be transported and moved to the optimal position by one person. On sites where no forklift is available, the wheel solution enables rapid and easy deployment of the ACM 18 aircon.

ACM18 CBRN mobile air conditioner

The 18kW cooling output ACM18 CBRN is designed for sealed shelter applications. A compact, lightweight unit made of aluminium and built into a rigid steel frame, it operates on COLPRO applications with the evaporator module placed inside the shelter and the condenser placed outside. The two modules are interconnected by refrigerant hoses, power and control cables. The ACM 18 CBRN’s NSN is 4120-22-618-1245.

The two units can also operate with both modules placed outside, with supply air and return air ducted to one tent. A dual-filtration system for the internal air path is available for selective filtration.

Both the ACM18 and ACM18 CBRN can be equipped with an electric heating coil to provide heating (e.g. for night-time, when temperatures can fall under 20°C).

ACM11 mobile air conditioner

The ACM 11 air conditioner (cooling output 11 kW) is developed primarily to provide air conditioning in temporary or transportable buildings or tents. It is a small, lightweight unit made of aluminium and built into a rigid steel frame. The unit is designed to be placed outside, with supply air and return air ducted to the tent.

For field hospitals where a higher filtration than for normal accommodation is needed, a dual filtration system for the internal air path is available. It can provide cooling at ambient temperatures up to 60°C. The ACM 11 is equipped with an electric heating coil, to provide heating, for example, at night time when temperatures can fall under 20°C. All sheet metal parts are protected against corrosion by a minimum 80 µm top coat.

As a supplement to the ACM 11 aircon, a 12kW electrical booster heater is available. With an ACM 11 and booster heater connected to a tent or shelter, the user will have one product solution to cover an operating range from -40°C to +60°C. This solution is designed for field hospitals where stable inside temperatures are very important.

A wheel kit is available as a basic add-on-solution, which can be fitted to the ACM 11 on site without using any tools. Easily accessible handles lift the unit to transport mode, and the ACM 11 can be transported and moved to the optimal position by one person. On sites where no forklift is available, the wheel solution enables rapid and easy deployment of the ACM 11 aircon.

VAM15 portable heater

The VAM15 handy, compact mobile heater is easy to transport, make ready for use and operate. Robust and extremely reliable, this mobile heater is ideal for providing heat and ventilation to tents, vehicles, etc., in all climatic conditions. Its NSN is 4520-22-613-3506.

The unit is easily vehicle-transportable to field locations and generous handles along each side allow it to be carried over rough terrain. The VAM15 is used by the armed forces of several NATO countries and relief agencies worldwide.

VAM40 portable heater

The VAM40 robust mobile heater with dual inlet and outlet ports provides high heat-output and adjustable airflow. It features either a hardened lifting point for a crane and / or built-in rails for lifting with a fork truck. The VAM diesel generator can be fitted directly onto the unit for transport and actual use.

The VAM40 is used by the armed forces of several NATO countries and civilian aid organisations. Its NSN is 4520-22-121-0561.

Custom-designed heating and cooling units

We also design, develop and manufacture custom-designed heating and cooling units. Staffed with a dedicated group of highly skilled engineers, designers, and technicians, the Dantherm Air Handling R&D department has the potential to take up any challenge of designing new customised products.

Heating and cooling unit accessories

Our mobile heating and cooling unit accessories include:

  • Air hose systems of 225mm, 315mm and 400mm in diameter
  • Air distribution ducts
  • Room thermostats
  • Flue-gas analysis kits
  • Fuel supply lances for jerry cans
  • Fuel supply lances for 200L oil drums
  • Jerry cans
  • CO2 monitors

Make an enquiry

Follow this company

Follow the company to be always up to date with this company

Press Release

Dantherm Announces Introduction of New 26,000 BTU A/C Unit

The new AC-M7C air conditioner is designed to provide climate control in ISO containers in hot environments and is capable of providing air conditioning in ambient temperatures up to 60°C.

White Papers

Icelandic team Sudurnes Use Dantherm Mobile Tent Heaters

Icelandic search-and-rescue team Sudurnes use Dantherm mobile tent heaters in their
rescue missions in Iceland.

Address
Dantherm Air Handling A/S

Marienlystvej 65

DK-7800 Skive

Nordjylland

Denmark

+45 96 14 37 38 (Gert Jensen) +45 96 14 38 31 (Lars Brodersen) +45 96 14 38 20 www.dantherm.com www.dantherm.com YouTube Twitter LinkedIn

Dantherm Air Handling Images

Products and Services

Dantherm AC-M16 Air Conditioner

The AC-M16 Air Conditioner is a transportable unit, developed primarily to provide air conditioning in temporary or transportable buildings or tents.

Dantherm Mobile Air Conditioner for Tents – ACM 18 CBRN

The ACM 18 CBRN air conditioner is a transportable unit, developed primarily to provide air conditioning in temporary or transportable buildings or tents.

Dantherm Mobile Air Conditioner for Tents – ACM 18

The ACM 18 air conditioner is a transportable unit, developed primarily to provide air conditioning in temporary or transportable buildings or tents.

Dantherm Mobile Air Conditioner for ISO Containers – ACM 5 MK II

The ACM 5 MK II is designed for window mounting in ISO containers. Together with the trap door system the air conditioner is mounted inside the container.

Dantherm Mobile Air Conditioner with Optional Heating for ISO Containers – ACM 5

The ACM 5 is designed for window mounting in ISO containers.

Dantherm Mobile Air Conditioner ACM 11 for Tents – ACM 11

The ACM 11 air conditioner is a transportable unit, developed primarily to provide air conditioning in temporary or transportable buildings or tents.

Dantherm Mobile Air Conditioner for ISO Containers – ACM7C

The ACM7C Air Conditioner (cooling output 7.7kW) is designed for outdoor mounting on containers and is ideal for on-road application.

Dantherm Mobile Heater for Tents – VAM 15 MK II

The VAM 15 MK II warm air heater is a transportable unit, developed primarily to provide heating in tents or temporary, transportable buildings.

Dantherm Mobile Energy Saving Ventilation for ISO Containers – HXM 100

The purpose of the mobile energy saving ventilation unit, HX-M100, is to reduce the operating cost of climate conditioned containers.

Dantherm Mobile Heater for Tents – VAM 40 MK II

The VAM 40 MK II warm air heater is a transportable unit, developed primarily to provide heating in tents or temporary, transportable buildings. The unit is designed to be placed outside the tent, with supply and return air ducted to the tent.

Press Release

23 August 2016

The new AC-M7C air conditioner is designed to provide climate control in ISO containers in hot environments and is capable of providing air conditioning in ambient temperatures up to 60°C.

Read more
28 January 2016

The acquisition of Dantherm HVAC by Procuritas V LP will take place through a newly established Danish holding company and includes subsidiaries in Denmark, Norway, Sweden, the UK and Germany.

Read more
3 September 2015

Dantherm will be unveiling its new air-conditioner with central control technology at DSEI, London on 15-18 September.

Read more
7 July 2015

Dantherm has delivered mobile cooling units such as AC-M11 and AC-M18 to a variety of projects in the Middle East.

Read more
2 July 2015

Dantherm delivers mobile cooling units such as AC-M11 and AC-M18 to a variety of projects in the Middle East. The warm climate requires high-end equipment, especially when deployed to the remote sites of the region.

Read more
23 July 2014

If you use heating, cooling and air conditioning in, for example, military camps, relief camps, or man camps in the oil, gas and mining industry, you will know that HVAC products account for up to 80% of the entire energy consumption.

Read more
7 May 2014

After a successful launch at the DSEI 2013 show in September, the new Dantherm ventilation unit for containers, HXM 100, is now proving its justification on the market for energy-saving cooling equipment for military containers.

Read more
9 September 2013

At this year's DSEI, the Danish manufacturer of mobile HVAC products, Dantherm, launches a new energy and fuel saving device for deployable mobile field camps.

Read more
30 May 2013

As part of its efforts to reduce energy consumption, Dantherm has started to replace old energy-consuming fans with energy-saving fans, which are compliant with the energy-related product (ErP) directive.

Read more
3 January 2013

As part of Dantherm's defence globalisation strategy, its range of air conditioning units is currently being expanded with 60Hz versions.

Read more
26 June 2012

Dantherm's mobile ECU's for tents and shelters are known as compact and light-weight units compared to competing units with equal capacities for cooling and heating.

Read more
12 April 2012

Dantherm recently published a new white paper that focused on head of Dantherm Air Handling's defence segment, Lars Brodersen.

Read more
14 December 2011

After a successful launch at the DSEI 2011 show in September, the new Dantherm environmental control unit (ECU) for military and other heavy-duty shelters and tents, ACM 11 is now ready to secure cool minds in the hot spots of the world.

Read more
10 June 2010

Dantherm Air Handling will be participating at Eurosatory 2010, from 14 to 18 June, and will be welcoming you to our outdoor stand, number EF230. Eurosatory, the international exhibition for land and airland defence, is the largest international meeting place in the world of official de

Read more
18 March 2010

In recognition of the increased range of nationalities involved in NATO and UN operations, Dantherm has released its homepage in a French language version. "It has been a request from an expanding group of our non-English speaking contacts that we should break down unnecessary language

Read more
26 August 2009

Meet Dantherm Air Handling at DSEi 2009 in London and learn more about our wide range of mobile heating and cooling solutions. On our stand you will find ACM 18, a compact, lightweight portable air conditioner made of aluminium and built into a rigid steel frame; VAM 40, a robust, mobi

Read more
9 August 2009

The Dantherm Air Handling defence team have visited Danish soldiers in Afghanistan, Iraq and other locations where the company's air handling systems are making a huge difference. Which would you prefer: Being left out in the burning sun in Chad in the West African desert, running acros

Read more
19 May 2008

Dantherm will be displaying its latest range of products on an outdoor stand at the leading Eurosatory Defence fair in Paris this June. Products on display will include: Mobile cooling units: ACM 18, ACM 18 CBRN, ACM 7 Mobile heating units: VAM 15, VAM 40 Ad

Read more
6 February 2008

The ACM 18 and the ACM 18 CBRN are transportable units developed to provide air conditioning in temporary or transportable buildings or tents. PORTABLE AIR CONDITIONER ACM 18 - NSN 4120-22-615-5382 ACM 18 is designed to be placed outside, with supply air and return air ducted to one te

Read more
3 August 2007

Dantherm Air Handling A/S will be participating for the second time at the Defence Systems and Equipment International exhibition (DSEI) in London, England. On display will be our wide range of solutions for mobile heating and mobile cooling. Our stand will be a part of the Da

Read more
23 June 2006

Dantherm Air Handling will be participating at DVD 2006. DVD is the annual vehicle event run by the DLO/DPA's Specialist and Utility Vehicles IPT, 28-29 June 2006, Bedford, Bedfordshire, United Kingdom. A range of our portable heating and cooling units and solutions will be on

Read more
16 May 2006

We will once again be participating at Eurosatory - The International Exhibition for Land and Land-air Defence 12-16 June 2006, Paris, France. A range of our portable heating and cooling units and solutions will be on show and we look forward to seeing you on our stand No. H30-03 in

Read more
24 June 2005

Dantherm will be participating at the Defence Systems and Equipment International 10-16 September 2005 London Docklands, UK. Our complete range of portable heating and cooling units will be on show and we look forward to seeing you on our stand No. 1295 in the Danish Pavilion.

Read more
24 June 2005

Dantherm participated in the Tetra World Conference last year in Vienna. The major reason for our decision to participate was our wish to know more about this interesting business area as the Tetra network seems to be the chosen backbone for security networks both in relation t

Read more
10 June 2002

Robust and sturdy air-conditioner for residential containers (NSN – 412022-127-0095 and 5340-22-127-0096) Air conditioning becomes a necessity in more and more situations where personnel must operate in high temperature locations. For this purpose A/S Dantherm has develope

Read more

Regional Offices

Dantherm Air Handling A/S

Marienlystvej 65

DK-7800 Skive

Nordjylland

Denmark

Gert Jensen Lars Brodersen (defence manager) Kim Mathiassen +45 96 14 37 38 (Gert Jensen) +45 96 14 38 31 (Lars Brodersen) +45 96 14 38 20 www.dantherm.com www.dantherm.com YouTube Twitter LinkedIn

Contact company

I have read and accept the terms and conditions and privacy policy.
We'd like to keep you informed about relevant promotions, products and services, if you would like not to receive these, check this box.
If you would like to hear from carefully selected third party companies, check this box
Follow this company to receive notifications when they update.