View all newsletters
Receive our newsletter - data, insights and analysis delivered to you

Nurol Makina

Tactical Wheeled Armoured Vehicles and Special-Purpose Platforms for the Defence Industry

Nurol Makina is a manufacturer of tactical wheeled armoured vehicles (TWAV) and special-purpose platforms for both Turkish and international users and provides innovative vehicle designs for defence applications.

Organize Sanayi Bölgesi Avrupa Hun Cad. ,
No:6 06935,

Nurol Makina is a manufacturer of tactical wheeled armoured vehicles (TWAV) and special-purpose platforms for both Turkish and international users and provides innovative vehicle designs for defence applications.

Armoured combat vehicles for advanced protection

EJDER YALCIN is an armoured combat vehicle (ACV) that offers superior features such as high-performance ballistic, mine and improvised explosive device (IED) protection, which are similiar to a mine resistant ambush protected (MRAP) vehicle. Together with a very high payload-carrying capacity, these protection features, together with a very high payload-carrying capacity, enable warfighters to intervene with enemies with distinct operational mobility and firepower advantages, as well as high confidence, even at combat zones.

EJDER YALCIN has advanced operational mobility levels due to its powerful engine, fully independent suspension, high ground clearance, and the optimal tyre distance between its stabiliser bar and axle. These features enable the vehicle to perform well under a broad range of conditions, from deserts to mountainous terrain.

In its standard configuration, EJDER YALCIN provides the highest level of fighting capabilities. For example, the 4t payload-carrying capacity enables the vehicle to satisfy many high-calibre weapon integration requirements and many weapon systems have already been qualified with the vehicle. As a result, it offers easy solutions needed for different missions without requiring new design or qualification, at low cost and minimum schedules.

Nurol Makina is a producer of high-quality design, development, production, integration and test requirement solutions.
Nurol Makina manufactures tactical wheeled armoured vehicles (TWAV) and special-purpose platforms for the defence market.
The EJDER YALCIN armoured combat vehicle provides advanced 360° ballistic protection and the highest level of mine and improvised explosive device (IED) protection in its field.
EJDER YALCIN's advanced operational mobility enables high performance in a wide range of environments.
The TOMA riot control vehicle is designed and equipped with state-of-the-art technologies to fulfil primary mobility requirements of security forces.
EJDER TOMA also meets security requirements with efficient riot intervention.
The ILGAZ II 4x4 security vehicle has been designed for military units, security forces and rapid response teams.
The NMS 4x4 offers scalable protection against ballistics, mines and IEDs.
NMS 4x4's modular design enables a wide range of operations such as air defence, equipment and troop transportation, light fire support and combat operations.

Armoured EJDER YALCIN configurations beyond ACVs include explosive ordnance vehicle, ambulance, reconnaissance vehicle, command and control, border surveillance, chemical, biological, radiological, and nuclear (CBRN), personnel carrier and jammer vehicle.

Riot control vehicles for security forces

TOMA (Riot Control Vehicle in Turkish) was developed by Nurol Makina in Turkey in 2002. TOMA vehicles are built by converting commercial chassis vehicles into armoured water cannon vehicles. They are designed and equipped with new technologies in order to meet the primary mobility requirement of security forces.

The EJDER TOMA variant is different to TOMA vehicles as it features a military chassis designed and manufactured entirely by Nurol Makina. With high off-road capabilities, EJDER TOMA vehicles are being used effectively both in rural and urban areas.

With a high 4×4 mobility capability and a fully independent suspension system, EJDER TOMA enables quick and effective riot intervention. It provides a safe and comfortable environment for personnel with a monocoque cockpit and multifunctional driver panel.

Low-maintenance security vehicles

ILGAZ II 4×4, the second version of the ILGAZ vehicle, was previously designed for use by security forces. It has been developed by Nurol Makina for maintaining public order for both military units and security forces, assisting rapid response teams, and preventing conflicts such as illegal protests and public demonstrations from escalating.

The modular ILGAZ II 4×4 meets the operational requirement of security forces in rural and urban areas. It offers easy care and low maintenance and can be used as an armoured ambulance or for personnel transport, anti-terror, reconnaissance, command-control and domestic security vehicle applications.

Ballistic, mine and IED protection

NMS 4×4 takes the performance levels of lightweight armoured vehicles to even higher levels. It provides scalable ballistic protection where protection levels of STANAG 4569 from Level 1 to 4 can be obtained.

Furthermore, it offers superior mine and IED protection as can be expected from a vehicle of this segment. NMS 4×4 is a highly useful solution for the current hybrid warfare sector. It can carry a substantial payload for a vehicle of its size, which has made it the vehicle of choice for modern armies and security forces. The modular design of NMS 4×4 enables the users to cover a wide range of special operations such as combat operations, transportation of troops and equipment, air defence, reconnaissance and light fire support.

Thanks to its higher speed and superior protection features compared to other vehicles in the field, the NMS 4×4 is also suitable as an escort in VIP convoys.

About Nurol Makina

Located in Ankara, Turkey, Nurol Makina produces advanced design, development, production, integration and test requirement solutions.

The company has been delivering turnkey industrial plants and performs large-scale contracting in terms of machinery production and steel construction since 1976.

Nurol Makina to participate in BDSA 2022 Exhibition

Nurol Makina participates BDSA Exhibition 2022 held at ROMAERO Aerospace Complex. This is the third BDSA exhibition for Nurol Makina and Nurol Makina vehicles have been demonstrated at Romania in the past.

20 May 2022

Nurol Makina Makes a Landing in the GCC

Nurol Makina, an advanced global armoured vehicle manufacturer, showcases at the Milipol Qatar exhibition the Ejder TOMA 4x4 riot control vehicle, which was previously procured by several countries in the world.

15 March 2021

Nurol Makina to Exhibit Land System Capabilities at DSEI 2019

Nurol Makina, operating under Nurol Holding, Turkey’s privately owned defense group company is exhibiting its expertise in land platforms at DSEI 2019, taking place on September 10-13. DSEI is one of the largest and most important Defence & Security exhibition in Europe.

12 September 2019

Nurol Makina Confirms Participation in IDEF 2019

Nurol Makina will showcase its products at IDEF 2019, which is taking place from 30 April to 3 May in Istanbul, Turkey. The latest versions of the company's vehicle family have been preferred by ten countries around the world and contractual negotiations are underway many others.

25 April 2019

Nurol Makina to Showcase NMS 4×4 Vehicle at IDEF 2019

Nurol Makina will showcase its NMS 4x4 at IDEF 2019. The vehicle is being showcased as a solution that has received its first orders and that is at the last stage of qualification tests, while being prepared in the meantime for serial production.

25 April 2019

Nurol Makina to Display Ejder Yalçın 4×4 Armoured Vehicle at IDEF 2019

Nurol Makina's Ejder Yalçın continues its progress with different configurations for different missions. The company has so far delivered five different configurations of the 4x4 Ejder Yalçın to different users around the world and will be displaying the ambulance version of the vehicle at IDEF 2019.

25 April 2019

Nurol Makina Brings EJDER YALÇIN’s High Protection and Superior Performance to Eurosatory 2018

Having created a class of its own with its outstanding levels of protection, mobility and payload capacity, EJDER YALÇIN will make another appearance in the global arena at Eurosatory 2018, held in Paris, France, on 11-15 June. This will be the first time Nurol Makina will be showcasing the platform at Eurosatory, which has already won significant praise from its users worldwide.

10 June 2018

Nurol Makina

Organize Sanayi Bölgesi Avrupa Hun Cad.
No:6 06935

NEWSLETTER Sign up Tick the boxes of the newsletters you would like to receive. The top stories of the day delivered to you every weekday. A weekly roundup of the latest news and analysis, sent every Friday. The defence industry's most comprehensive news and information delivered every month.
I consent to GlobalData UK Limited collecting my details provided via this form in accordance with the Privacy Policy


Thank you for subscribing to Army Technology