Frequency control specialist, Euroquartz is to launch a new range of UK manufactured surface mount...
Frequency control specialist, Euroquartz has launched a new range of oscillators from Statek offering ultra-low power, fast start-up and high shock-resistance characteristics in a surface-mount package measuring just 3.2mm x 1.5mm x 0.95mm.
The CXOLHG features frequency output of 32.768kHz and achieves typical low power consumption of 1µA at 3.3V supply voltage. This is comparable with a tuning fork design while fast start-up time of 3ms typical and tight frequency stability are as good as those obtainable with AT-cut crystal designs. The new oscillator is also capable of withstanding shock up to 30,000g and above, significantly higher than that achieved by tuning fork designs.
With full military testing available, Statek’s new CXOLHG oscillator also offers low acceleration sensitivity, typically 0.5ppb/g, essential in aerospace applications.
Specifications include supply voltage range from 1.8 to 3.3V, calibration tolerance of ±25ppm, output load (CMOS) of 15pF and ageing of ±3ppm in the first year. Frequency stability is ±10 to ±50ppm over commercial temperature range (0°C to 70°C), ±20 to ±50ppm over industrial temperature range from -40°C to 85°C, and ±35ppm to ±50ppm over military temperature range from -55°C to 125°C. Shock options encompass 30,000g, 50,000g, 75,000g and 100,000g (0.3ms, ½ sine) while vibration survival is 20g, 10Hz to 2,000Hz, swept sine.
The new oscillators are hermetically sealed in four-pad housings and not sensitive to moisture. Maximum process temperature is 260°C for 20 seconds. There are two Enable/Disable options available: E, which stops oscillation when the output is put into the high Z state and N, which does not have enable/disable pad connected internally.
The new Statek CXOLHG oscillators are available either in tray packs (up to 250 pieces) or 12mm tape and 178mm or 330mm reels (EIA418) for more than 250 pieces.
Euroquartz is an independent UK-based manufacturer and supplier of quartz crystals, oscillators, filters and frequency-related products to the electronics manufacturing industry worldwide. The company is AS9100 registered and designs and manufactures a comprehensive range of frequency control components for a wide range of customers such as major OEMs covering a broad spectrum of applications, including military and aerospace, communications, general electronics, computing, control systems and petrochemical among many others.
For more information, please contact: Andy Treble, Euroquartz Ltd, Blacknell Lane Industrial Estate, Crewkerne, Somerset, TA18 7HE.
Tel: 01460 230000, Fax: 01460 230001
e-mail: [email protected]
Press enquiries to: Tim Jennings, Marshall Jennings PR Limited, Wyvols Court, Swallowfield, Reading, Berkshire, RG7 1WY.
Tel: 0118 988 0288, Fax: 0118 988 0388
e-mail: [email protected]
Frequency control specialist Euroquartz has completed the installation of a new class 7 cleanroom facility...
Euroquartz has launched a new range of miniature surface mount temperature-compensated crystal oscillators (TCXO), which...
Euroquartz has launched a new range of surface mount miniature oven-controlled crystal oscillators (OCXO) offering...