PCB Piezotronics

Piezoelectric Quartz Sensors, Accelerometers and Electronics for the Defence Industry

View by: Date Added / A-Z
1200ºF Charge Output Pressure Sensor with UHT-12™ Element (series 176AXX)

With the move toward increased fuel efficiency and lower exhaust emissions, today's gas turbine engines are based on technological innovation yet also bring potential problems.

1200ºF Charge Output Pressure Sensor with UHT-12™ Element (series 176AXX)
Charge Output Accelerometer with UHT-12TM Shear Sensing Crystal (Model 357A100)

UHT-12TM is a new crystal designed for more accurate, lower noise measurements during large temperature variations.

Charge Output Accelerometer with UHT-12TM Shear Sensing Crystal (Model 357A100)
ICP® Mechanically Isolated 100,000g Shock Accelerometer (Model 350B01)

Piezoelectric ICP® accelerometers produce a very high signal output (+/- 5 volts full scale) and the ease of two-wire electrical connectivity.

ICP® Mechanically Isolated 100,000g Shock Accelerometer (Model 350B01)
ICP® Mechanically Isolated, Electrically Filtered 10,000g Triaxial Shock Accelerometer (Model 350A43)

ICP® Triaxial shock accelerometer, 0.5mV/g, 10kg range, mechanically isolated and electrically filtered, 5ft integral cable. Piezoelectric ICP® accelerometers produce a very high signal output (+/- 5 volts full scale) and the ease of two-wire electri...

ICP® Mechanically Isolated, Electrically Filtered 10,000g Triaxial Shock Accelerometer (Model 350A43)
Low Noise MEMS DC Accelerometers

PCB® series 3711E, 3713E and 3741E MEMS DC response sensors are designed for measuring low frequency motion down to 0Hz.

Low Noise MEMS DC Accelerometers
MEMS High-G Surface Mount Shock Accelerometers (Series 3503C20xxKG3)

Piezoresistive MEMS high-amplitude shock accelerometers represent the latest industry technology for miniature, high amplitude, DC response acceleration sensors.

MEMS High-G Surface Mount Shock Accelerometers (Series 3503C20xxKG3)
Triaxial ICP® Low Thermal Coefficient Accelerometers (339A series)

PCB® single and triaxial ICP® accelerometers are created with good broadband measurement resolution, a wide operating temperature range and low temperature coefficient, making them ideal for any vibration measurement requiring tight control of amplit...

Triaxial ICP® Low Thermal Coefficient Accelerometers (339A series)
Triaxial, Lightweight (1.0gm) Miniature, Ceramic Shear ICP® Accelerometers (Model HT356B01)

Platinum stock product Triaxial, lightweight miniature, ceramic shear ICP® accelerometers, 5mV/g, to 356°F (180°C). It is best suited for applications such as gas turbine blades, small component qualification testing, environmental stress screening, ...

Triaxial, Lightweight (1.0gm) Miniature, Ceramic Shear ICP® Accelerometers (Model HT356B01)
Triaxial, Lightweight Miniature ICP® Accelerometers (Series 356A4X)

Miniature triaxial ICP® accelerometers come in a range of sensitivities to match specific application requirements.

Triaxial, Lightweight Miniature ICP® Accelerometers (Series 356A4X)